Therefore, it is essential to understand the electrical system of your home. You can always
rely on an professional electrician, but knowing yourself can save you from some long-term
trouble and save some time.

So, let’s explore some of the basic terms of the circuit and learn their function.

● Circuit Breaker and Fuses:

In your property’s switchboard, you’ll discover fuses and circuit breakers. They’re essential
for keeping your electrical wiring safe. They are located on the switchboard and relate to
distinct areas of wire in your home, known as circuits.

When an electrical fault occurs, the fuse or circuit breaker will blow, or the circuit breaker
will trip as a safety device. This interrupts the circuit and turns off the power to that part of
the property, preventing overloading and fires.

The primary difference between fuses and circuit breakers is that circuit breakers can be
reset, whereas fuses must be replaced once they blow.

● Electrical Wiring:

The terms wiring and electrical are frequently used interchangeably. Electrical wiring
comprises insulated conductors that carry power throughout a house.

Different countries have their wiring standards. This standard is recognized as
AS/NZS3000 in Australia and New Zealand. But it is known as the wiring regulations; in
other countries. The standards for selecting and installing electrical equipment and how
these installations must be developed and tested are outlined in this standard.

It is critical that wires in a wiring system be identified quickly, conveniently, and safely. As
a result, the color scheme for the insulation covering power conductors is specified in
wiring safety rules.

● Branch Circuit Breakers:

The branch circuit breakers are normally situated below the main breaker in the panel.
Each of these breakers is a switch that controls how much power flows through the houses
branch circuits.

When you switch off a breaker, it also turns off all devices and appliances on that circuit.
The breaker immediately trips off when a circuit develops a problem, such as an overload
or a fault.

Indeed, the most common reason for a tripped breaker is a circuit overload. If you are using
a high-demand appliance like a vacuum, toaster, or heater and the power goes out, you’ve
probably overloaded the circuit.

To reset the breaker, move the appliance to a different circuit and turn it on.
Note: always avoid loose switches or loosely connected outlets.
Common Household Electrical Problems

How do you know you need an upgrade to your home’s electrical system? It is quite
obvious as you will be facing more electrical problems now.

Worn-out insulation is common due to a lack of grounding and wiring that was not
designed to handle today’s heavy-duty appliances. There are a variety of different electrical
issues that are not limited to aged wiring, and you need to watch out for them too.

● Lighting, broken electrical lines, and malfunctioning equipment or wiring are all
common causes of surges.
● Faulty devices connected to the electrical grid are the source of power outages (or
are made of inferior materials).
● Light switches that do not function properly.
● A circuit breaker that is frequently tripped.
● A circuit breaker that has tripped as a result of being overloaded.
● Shocks.
● Its either too light or too dark in the room.
● The cost of electricity is exorbitant.
● Light-bulbs are burned out regularly.

Bottom line

Remember that electricians in Auckland are not always seconds away to rescue you from
any fault in the circuits. Therefore, having a little information and understanding of the
systems functions, you can always switch it off when needed or make other amends
according to the need. You will only need a professional for heavy lifting.

However, this doesn’t mean that you should not consult an electrical professional. Unless
you are an expert, you must rely on someone qualified to check and fix the circuit.
So, if you are looking for an electric expert in New Zealand, DJ Spark is ready to assist you
with the safe electrical system of your home.

The post Everything you need to know about your home’s circuit appeared first on DJ Spark.

Seems like the appliances are the real culprit? Well, it is not the appliances burning places down, but your negligence and bad habits.

Not really aware of the bad habits you are carrying with you?

Here are the top bad habits; you can change to avoid burning your house down.

7 habits that can burn down the house

Fire safety is one of the essentials for the house. So, check out the list of bad habits below, and if you are guilty of them, start changing from today!

Neglecting Appliance Recalls:

More than half of the fires are caused because of defective appliances. Register your appliance with the manufacturer to stay on top of recalls and avoid disaster in your house.

Misusing Electric Blankets:

A warm and soothing electric blanket is a welcome luxury in the winter, but it may also be a fire threat if used incorrectly. Allowing pets to snuggle on top is not a smart idea, and placing more blankets on top of the electric blanket can result in a fire.

Use the lowest setting on your electric blanket, never bend the coils, and turn it off first thing in the morning.

Letting Your Device Overheat:

If you possess a smartphone, laptop, or tablet, you are well aware of how hot they can get. You run the danger of blocking airflow via the cooling vents if you put your laptop on your bed, couch, rug, or other soft, combustible surface.

This might cause your laptop to overheat and possibly catch fire. Keep your smartphone on a desk or table instead to avoid fires.

Using Too Many Extension Cords:

Extension cables are intended to be a temporary fix for a lack of electrical outlets rather than a long-term solution. Here’s why: Connecting a large number of cords for an extended period of time can result in an overload, which can lead to a short circuit, which can start a fire.

If you need more outlets, get a trained electrician to install them, so you don’t have to deal with this issue.

Leaving Cooking in the Kitchen Unattended:

Cooking (especially unsupervised cooking) is by far the leading cause of house fires. It only takes a few seconds for neglected cooking practice to catch fire. The most dangerous one is to fry something.

Thanksgiving is the busiest day for home cooking fires; therefore, you should be extra cautious on that day. Never leave cooking unattended, and if you intend to fry or BBQ, an outdoor cooking arrangement is preferable.

Performing DIYs You’re Not Qualified to Do:

As gas leaks and electrical sparks caused by poor installation are a significant cause of house fires, jobs requiring electrical wiring, plumbing, and HVAC equipment should always be completed by a certified professional electricians Auckland.

Hire a licensed professional instead of risking your house and family by attempting these unsafe DIYs on your own.

Ignoring Uninvited Guests:

Mice and other rodents bite on electrical cables to keep their teeth from becoming too long. They can eventually remove the coating, exposing the wires.

Unfortunately, the electric current that passes through the wire produces heat, which, in the absence of sheathing, could result in sparks from short circuits, which could ignite the surrounding surfaces. Call a professional exterminator right once if you suspect a rodent problem.

Overheated laptops:

The laptop is the one device that we take for granted most of the time. It usually causes a fire if you work laying on the bed and keep it on the cushions or other flammable stuff.

The blockage of the proper airflow through the cooling vents of the laptop causes it to overheat and sometimes results in a huge fire. So, always prefer to keep your laptops on a flat surface, preferably a wooden table.

Bottom line

When it comes to a fire in your house, mistakes happen. But being prepared and proactive can save your life.

So, keep these habits in mind and do your best to avoid them at any cost. Besides, if you are no expert in installing electrical appliances or fixing electrical wires at your place, it is always helpful to call a professional like DJ spark. They have experts who can replace faulty electric wires and fix them to provide house safety. We have electricians available near you (electricians north shore, electricians east Auckland, electricians West Auckland and Electricians South Auckland).

The post Bad habits that could burn your house down appeared first on DJ Spark.

Electrical wiring is one of these specific fields. Even at your home, you have electrical appliances in need of a proper electricity supply. In these times, DIY is surely a tempting offer. But it is not always the right choice.

Is it?

Yes, DIY can be very tempting at times, but when we talk about electrical work, there is also a hesitation. And of course, it is better to be safe than sorry. Besides, we are talking about the electrical work here; and it is usually complex.

To deal with the complex electrical work, you must hire a licensed electrician.

Reasons why you should hire a qualified electrician

When looking for an electrician, it’s critical to find one that is adequately qualified and licensed. Why? Keep reading and learn more reasons.

#1 – Always put your safety first

Working with electricity isn’t something to be taken lightly. Working with shocks can be extremely dangerous if you don’t know what you’re doing, and electrical shocks can result in significant long-term injury or even death. A competent electrician can manage that risk and almost eliminate the possibility of injury. They’ll ensure your electrical wiring is done correctly for your and your family’s safety.

#2 – Save you from problems when selling your home:

A qualified electrician will issue you a certificate of compliance and/or an electrical safety certificate for certain work. And it ensures that the electrical work meets New Zealand safety standards. If you need to file an insurance claim or sell your house, save these documents in a safe place.

#3 – Competency:

When choosing an electrician, the most important factor to consider is whether or not they will complete the job correctly. Employing a professional electrician is the only way to know for sure. Their accreditation guarantees that they are fully skilled in all critical talents, ensuring that you get the greatest results possible.

#4 – You can save time:

This should be self-evident; time does not always cooperate with us. Your schedule is already jam-packed! Don’t make an electrical problem your top priority if you don’t have enough hours in the day.

Also, you are more likely to make mistakes and harm yourself if you speed through a project. Make an appointment with a professional. It’s better to be safe than sorry when it comes to potential electrical hazards in your home.

#5 – Licensed electricians are updated:

Licensed electricians have their licenses updated and renewed regularly. This means that they will receive critical technical updates as part of their training. Changes in your community’s zoning regulations may have an impact on how a project is done.

#6 – Licensed electricians understand what your inspector will be looking for:

Your work will need to be inspected at some time. Perhaps it’ll happen when you sell your home. Alternatively, if you’re building a significant extension, it could be near the finish. You want to make sure the work passes inspection and doesn’t end up costing you more money or delaying the sale of your home.

#7 – Incorporate advanced electrical equipment & tools:

By selecting a licensed electrician, you can rest assured that they will have all of the instruments necessary to perform the task. Besides, they are trained to use the latest tools and equipment for modern problems.

On a daily basis, licensed electricians Auckland like DJ Spark use their advanced tools. On the other hand, non-registered workers are less likely to have the tools they need to complete the task safely.

Bottom line

Do not scrimp on quality by employing an unauthorized electrician or performing the work yourself. Instead, hire an expert with the necessary education and skills. Isn’t that the person you’d want to take care of your home’s electrical problems?

Electricians have a safety-first approach and are licensed and educated regularly. Remember that hiring a professional electrician will not only save you time and money, but it is also the safest option.

Overloaded circuits, improper connections, overheating, sparks, fires, and other damage are common among do-it-yourselves. So, it is better to give a call to a professional like DJ Spark because all their electricians are certified. Also, DJ SPARK is proud to be a member of Master Electricians.

The post 7 Reasons why you should hire a qualified electrician  appeared first on DJ Spark.

Now, let’s find out the common mistakes everyone makes and end up damaging the electrical project.

Top 5 Common mistakes DIYERS make with electrical projects

It is not a bad idea to fix your own electrical problems. Just remember that you need to have more understanding about the basics and common mistakes to avoid any long-term or expensive damages.

Understanding what you’re doing before starting a project, big or small, is crucial to its success. Here’s a rundown of the most typical electrical DIY blunders. You can avoid the greater problems entirely by knowing these errors.

·       Improper Grounding:

Grounding is a crucial step in ensuring the safety of your home’s electrical system. Electrical surges are channeled harmlessly into the earth by a ground wire.

Connecting electrically conductive equipment to the system ground is known as bonding. If you don’t have this protection, you risk the breaker not tripping when you have a short circuit. Many householders are unaware of this, despite the fact that professional electricians are aware of it.

·       Wrong Wires:

This is the most prevalent sort of electrical error. In your home, you’re dealing with faulty wiring connections. This can take numerous forms, ranging from something as simple as choosing unprotected, exposed wires to something more serious like establishing incorrect connections with them.

Maybe you ground the wrong wire, or maybe there are too many wires under the same terminal, or maybe your wires aren’t properly insulated. So many errors may be traced back to faulty wiring. Make sure you don’t make any of them.

·       Cutting Wires Too Short:

Always keep your electrical wire at least 3-6 inches away from your junction box. Wires that are cut too short have weak connections and can cause fires. If you’ve realized that you’ve cut your cables too short, a splice may be able to help you fix the problem.

Also, you must take the necessary precautions to avoid receiving a shock when working with wires and electrical voltages. Even a low-voltage shock can cause serious injury or death.

·       Improper Junction Box:

When installing a new light fixture or electrical outlet, utilize a steel or plastic junction box. Any electrical connection, in actuality, must be made within the constraints of a proper junction box.

If you have a short circuit or a loose connection, this safety regulation is designed to protect your electrical connections as well as prevent sparks and heat from spreading. Junction boxes must be flush with your drywall and easily accessible in the event of an electrical emergency; they cannot be buried or hidden in walls, floors, or ceilings.

·       Overloaded Outlets:

Overloading outlets is the most common electrical DIY mistake we see. Obviously, overloading an outlet with too many items might cause the circuit to short out. It’s also crucial to consider how many amps each outlet can withstand. Just because an outlet isn’t in use doesn’t mean it can’t be used for something else.

Ensure that each piece of equipment, particularly in the kitchen, has its own dedicated circuit. Things that generate heat or cold, in general, use the most electricity and require the most amps to operate. It’s also crucial not to overload outlets with festive lights during the holidays or when preparing a large meal with multiple appliances.

Bottom line

Our ultimate recommendation is to look up all the mistakes you might make and avoid any errors. However, you can still look for professional assistance and hire a electrician in Auckland to avoid health & safety hazards due to small or bigger errors.

For more guidance and professional electrical maintenance, Dj Spark can maintain your home’s or office’s light for you. So, reach out now and let’s talk about the problems you are facing with your electrical projects. Our Residential and Industrial electricians are ready to help.

The post Common mistakes DIYERS make with electrical projects appeared first on DJ Spark.

Besides, as electric cars (EVs) grow more inexpensive, some experts anticipate that by the end of the decade. They will account for nearly a third of all new automobile sales.

In New Zealand, we have already seen it happening. As governments press forward to promote climate action via alternative fuel sources, the topic of electric car adoption among manufacturers is no longer wrapped in question but rather backed with assurance.

Although electric vehicle adoption in New Zealand has been slower than in other places, this is expected to improve in the next years, as the market has been validated by the arrival of high-quality EVs from Audi, Jaguar, and Mercedes-Benz in recent years.

Impact of the Electric Vehicles on the Overall Future

Over the last few years, the number of electric vehicles in New Zealand has doubled per year, reaching 14,000 vehicles or above. This is partly because of the abundance of low-cost used vehicles, the majority of which are imported from Japan. Annual transportation emissions should be cut by at least 6 million tonnes of CO2e by 2035, according to the Interim Climate Change Committee, compared to current levels. Electric vehicles, as well as other advances such as hydrogen-powered cars, improved rail transportation, and greener shipping, are projected to play a vital role in achieving this goal.

What to Expect from the EV’s in the Future?

New electric vehicles are expected to join the market, building on Tesla’s and other well-known EV manufacturers’ successes, such as BYD, BAIC, Nissan, BMW, and Volkswagen’s. Legislative victories in Europe, rising demand in Asia, and heightened awareness of the environmental consequences of fossil fuels in New Zealand will all contribute to the continued spread of EV technology. Here are a few sectors to keep an eye on for electric vehicle advancements:

• Racing: Formula 1, the pinnacle of motorsport, has reported a significant advancement in full-electric motor technology.
• Motorcycles: Historic motorcycle companies like Harley-Davidson and Ducati are already planning to transition to electric motorcycles.
• Semi-electric trucks: The long-awaited electric semi-truck has come closer than it has ever been. The road-based transportation business will be revolutionized by companies like Nikola, Rivian, Tesla, Daimler, and Volvo.
• Boating: Electric boats may soon be available at a marina near you, allowing boaters to navigate the world’s wide oceans solely using wind, solar electricity, and electric motors.
• Airplanes: Electric planes appear to be the next step in the evolution of electric automobiles.

Cost of Ev’s in New Zealand

Even while electric vehicles are more expensive to purchase, they are much less expensive to operate and maintain than gasoline vehicles.

An annual trip of 12,500 kilometers in New Zealand would cost around $2500. They would only pay roughly $500 if they drove an electric car. That’s a substantial financial boost for the family.

Cost Factors to Run Your EV depends on:

• The cost of electricity is (approximately 25c per minute plus 25c per kWh at a ChargeNet site, or if you stay at home and charge all night, it will be $1).
• The amount of time you spend driving.
• What type of driving do you undertake — hills, quick highways, meandering country roads?

Well, imagine you have managed the budget for the EV, and you can afford the cost too. But what are the charging options for you in New Zealand?

What are the Charging Options for EVs Now and in the Future?

In New Zealand, EV users can choose from roughly 65 different domestic charger options. Additional alternatives are available in other countries (e.g., the United States and Europe), and they may be introduced in New Zealand as the market establishes with time. Many of the current charger models are smart-charging wall-mounted chargers that offer faster EV charging and include control functions to manage the time and electrical load.

These chargers could eventually form the foundation of a fully regulated charging environment, allowing owners and other parties to control car charging. The expense of quicker, more feature-rich chargers, which can cost $5,000-10,000 to buy and install, is a major barrier to adoption.

Bottom line

The future is inevitable as the innovation in the form of an electric vehicle is just the beginning. Remember, electric vehicles are more powerful, economical, safe, and dependable than ever before. EV technology is being pursued by nearly every automotive manufacturer in the world right now, and many other businesses are exploring methods to adapt the science for their own products. So, fingers crossed as we are about to witness some amazing science in the future!

If you are already into it, you are probably looking for charging options. Well, DJ SPARK offers you all kinds of EV charger installation services in your area. Reach out to our electricians Auckland team now to know more!

The post What is the Future of Electric Vehicles? appeared first on DJ Spark.

·      Use Renewable Energy Sources:

Ever thought of renewable energy sources? Yes, they are a great way to reduce your bills and lead yourself to a sustainable energy transition.

Renewable energy is derived from naturally renewing but flow-limited sources; renewable resources have nearly infinite length but a finite amount of energy per unit of time.

Renewable energy is also known as “green energy” or “clean energy” because, unlike fossil fuels such as coal and oil, it emits no or very few greenhouse gases. We must transition away from inefficient energy sources in order to address climate change and improve air quality.

·      Install a Programmable Thermostat:

A programmable thermostat increases heating and cooling efficiency by allowing homeowners to fine-tune their climate control systems to achieve the ideal temperature at the lowest cost. A programmable thermostat allows you to lower the temperature when no one is home or everyone is in bed. Furthermore, once the thermostat has been programmed, it will automatically regulate the temperature without the need for any further human adjustments.

·      Using Ceiling Fans to Improve Air Conditioning:

Ceiling fans provide more than just aesthetics; they also provide a soothing breeze. More importantly, they assist in air circulation throughout your home, which is beneficial in both the summer and winter. The cost of running these fans is pennies per day, far less than the cost of running an air conditioner.

·      Make Your House as Airtight as Possible:

Home heating and cooling expenditures can be reduced by up to 10% by sealing cracks, gaps, and leaks, as well as installing insulation. You can find these gaps around the windows, light switches, electrical outlets, and plumbing pipes too. The drawback of leaving these cracks as it is; will cause losing the cool or heat of your HVAC system. Eventually, it makes your system works harder and increases your bill. So, when you are ensuring that your home is energy-efficient, do not forget about these gaps and cracks.

·      Install Energy-Efficient Windows:

High-efficiency windows make a significant difference. Windows are responsible for 50% or more of energy loss. Double glass, special coatings, nonconductive framing materials, and higher-quality, air-tight construction are examples of new technologies.

Better energy efficiency reduced fading of your things, and quieter rooms are all benefits of replacing windows.

·      Insulate the Loft:

Warm air rises and loses a quarter of your home’s heat through the roof, and older homes with insulation may not have the recommended levels, especially if it was done in the late ’70s or ’80s. To avoid heat loss, make sure your loft or attic space is well insulated if at all possible.

·      Install Energy-Efficient Lighting:

Minimizing energy use for lighting while optimizing illumination for residents is a fundamental component of zero-energy houses. For these purposes, LED lights are suitable. They consume less energy than CFLs, last far longer, and are mercury-free. They can also be used for a variety of lighting needs, ranging from very bright white light to soft, warm light. Choosing the right LED lighting for the work, strategically situating lights, and utilizing natural light can help a home save money on electricity.

·      Use the Sun for Solar Tempering

Winter heating expenditures are reduced by allowing the sun to heat through south-facing windows. In the summer, shading those same windows saves money on air conditioning. Solar tempering aims to maximize the passive utilization of the sun’s heat while reducing the extra thermal mass expenditure required for successful passive solar heating. At all stages of the design process, solar tempering should be considered.

Bottom Line

Finally, living life with cost-efficient bills is not really hard. All you need is to make some changes in your house and habits. If you are designing your home right now, you can work on a lot of things like lighting and HVAC systems or windows or doors to reduce your energy bills. Get the advice from professionals of DJ Spark, and we can help you with it. The expert electricians of DJ Spark are specialized in installing the lightings, HVAC systems and solar systems also. Moreover, a few tips from the above can help you greatly in making your home energy-efficient and safe for climate as well. Contact DJ Spark’s team for the expert advice, any time.

The post 7 Ways to Make Your House or Office Energy Efficient appeared first on DJ Spark.

Similar to the gas stations, we now have EV charging stations. Remember that whenever we talk about EVs, manufacturers and charging stations do not expect you to understand the terms like terabytes, gallons, kilobytes, etc. They dumb down the working and make it easy for the common public.

EVs in New Zealand 

New Zealand is well-positioned to benefit from an increased uptake in EVs. This is because more than 80% of electricity is generated from renewable sources, and a sufficient renewable energy supply is available to support the widespread adoption of EVs. Therefore, the emission reduction benefits of EVs are greater in New Zealand than in other countries that generate less renewable energy. Additionally, the average daily commute is relatively short (<40km), and the majority of households have access to off-street parking with an electrical outlet to charge EVs.

The cost of charging an electric vehicle in NZ

The cost of charging an electric automobile is determined by the amount of driving you do. If you’re like most Kiwis, who drive 25-35km per day on average, charging at home will cost roughly $3 every 100km (the equivalent of $0.30 per liter of petrol). If you use quick charging, the cost every 100 kilometers might be as high as $10.

These are estimates based on criteria such as how far you travel and the sort of driving you to do (around town, hills, or highways). Regardless, you’ll save a lot of money compared to filling up with gasoline or diesel.

Categories of EV charging infrastructure

EV batteries are typically charged using chargers that are connected to the electric power grid. The power system provides alternating current (AC), but an electric vehicle’s battery requires direct current (DC). Depending on the technology, AC to DC conversion might happen in the car or the charger.

·       AC Charging for EV

A built-in inverter converts AC (from the grid) to DC inside the vehicle. The AC-DC converter unit’s capacity influences how much of the charging station’s available charging capacity can be used. Currently, the greatest charging capacity available via AC charging at home is 22kW on a three-phase connection and 11kW on a single-phase connection. In a home / low voltage situation, this form of charging is most commonly employed (2.3- 22kW range).

·       DC Charging for EV

Outside the car, AC (from the grid) is converted to DC in an external charger. The charging point can charge at high power (usually in excess of 50kW) thanks to direct current (DC). The car battery is in direct touch with the charging point. Typically, this sort of charging is utilized for public fast charging.

·       Wireless Charging for EV

Electromagnetic waves are used to charge the batteries in this system. A charging pad linked to a wall socket and a plate attached to the car is commonly used. Wireless chargers currently available can deliver up to 11kW (for home use) and 75kW (for commercial use) (for public chargers). Designed for garaged vehicles in a home setting (3-11 kW range).

Charging your car

We measure electricity in kilowatt-hours (kWh) rather than liters, so you’re less likely to hear electric car drivers discuss dollars per liter and more likely to hear them discuss:

The cost of electricity is expressed in cents per kWh, which determines the cost of travel and charging.

Km per kWh, which is similar to miles per gallon,’ or how far you can drive for a unit of electricity.

kWh as a battery size gives you an idea of how far you can drive (range).

kW as a charging speed gives you an idea of how quickly you can recharge (e.g., a 30kWh battery should take around 10 hours to recharge with a 3kW charger).

You may recharge your automobile using the standard 230 volt AC energy in our homes and the regular plug we use for all household appliances, albeit specialized equipment is faster and safer. WorkSafe, the electrical safety authority, publishes instructions on its website about what is required and recommended for electric vehicle charging equipment, sockets, and wiring in both private and public settings.

Bottom Line

Hopefully, you know enough about the charging stations to hop in your electric car and drive away without worrying about getting stuck on your way. Still, never hesitate to ask questions as the expert electrician team of DJ Spark is here to ensure that you get more clarity on EV charging and EV charger installation. Also, if you need EV charging services, get in touch for more information.

The post How do EV Charging stations work? appeared first on DJ Spark.

Whether it is out of fear or a general misunderstanding, some people stick with what they know, even if it is damaging in the long run. An example of that is the decision to use fluorescent lightbulbs compared to LED lighting. Most homes support fluorescent lighting as it has been in use for over 100 years. However, this type of lighting is archaic next to LED lighting.

Fluorescent Bulbs

Discovered back in the 1800s, the concept of lightbulbs was discovered by Humphry Davy. Although not the first official lightbulb creator, he brought scientists the notion that light can be human-made. Further on, Thomas Edison invented the first working lightbulb, and since then, society has adapted it into their routine. However, as time goes on, scientists are discovering the harms fluorescent lightbulbs are causing. There is toxic mercury inside the bulbs to mediate the power bursting inside them. This chemical is hazardous to humans and the environment.

Another fact about this type of lighting is that it does not last very long. The energy the bulb uses to start the lighting process weakens over time. When you flip the switch to your fluorescent light, you are killing it with every switch.

Another thing to contemplate is that you have a small ball of UV radiation lighting up your home. These lightbulbs are old-fashioned. As research continues to grow in this subject, discontinuing fluorescent lightbulbs would be the better choice overall for home, family, and the environment.

LED Lighting

On the opposite margin of the scale, we have LED lighting. Nick Holonyak discovered this type of lighting in 1962 and since then has revolutionized modern lighting. The light didn’t take hold until later, but once people became aware of such a product, more and more homes acquired this product.

LED lighting is a straightforward form of electricity that does not emit harmful radiation or dump toxic waste into the environment. They are long-lasting and do not require constant upkeep or changing of bulbs. These lights handle their own business and stay bright for a substantial amount of time. They are energy efficient, and the maintenance cost for any issue is low. This is cost-effective, energy-efficient, and provides one with a healthy home environment.

In other words, switching to LED lighting will have your home brighter, healthier, and free of any unwanted chemicals while also being cheap for the high-quality light it produces. Another exciting fact about LED lighting is the ability to switch colors! Using a switchboard, hook your LED lights up and program them to dance in a rainbow of colors! Of course, this is a bit of a feat for a novice electrician, but it never hurts to get assistance as it is cheaper than buying new fluorescent bulbs daily.

Comparison

After all the information, it is pretty easy to say that LED lighting is the new, revolutionized way to light your home. Now one may be thinking it is a difficult task to complete but fear not! There are many types of businesses and companies designed to help you with precisely that. If you are looking for electricians in your area with professionalism and knowledge, NZ electricians will help you achieve your goals. With only the best electricians to dispatch, setting up LED lighting with switchboards and more will be easy and allow you to obtain the healthy home you have always wanted.

From lighting your home up in a bright purple haze to classic white for studies and more, the diversity and safety this type of lighting offers are better than anything on the market at this moment. Make the switch confidently and hire professional electricians to perform these tasks, and for further peace of mind, choose the best electrical installation company around!

Overall, both types of lighting do get the job done, however, LED lighting is more cost-effective and energy-efficient. It is long-lasting, and you won’t be spending hundreds a year to upkeep lighting in your home. Make the switch today and hire DJ Spark Certified electricians to help you in the process of making your home a happier, brighter, and healthier place.

The post LED VS FLUORESCENT LIGHTING appeared first on DJ Spark.

✓ Are you experiencing frequent power outages?

✓ Does your switchboard Overheat?

✓ Are your home’s lights flickering?

✓ Can you smell burning when you are near your switchboard?

✓ Your house built ten years ago?

If the answer to any of these questions is yes, you need to immediately upgrade your switchboard as per the NZ electrical regulations and standards to improve the safety within your premise.

But, let’s first understand, what is a switchboard upgrade?

A switchboard upgrade is when existing rewireable fuses aresupplanted replaced? with new residual current devices (RCDs) and circuit breakers in order to improve the overall electricalsafety.

Not only does upgrading your switchboard enhance the safety of your premises but it also increases the value of your property. With a switchboard upgrade, you can fit out your new board with Residual Circuit Breakers (RCDs) and Miniature Circuit Breakers (MCBs) instead of the rewireablefuses, thus making it secure as well as easy to use for further or future upgrades.

A deep glimpse into what the current switchboard upgrade in New Zealand is all about:

It is important to ensure that your switchboards meet the current New Zealand electrical standards and regulations. With the current switchboard upgrade, the risk is minimized since RCDs are installed. RCD’s are effective especially because they constantly monitor the electrical current flowing along a circuit.

If someone touches a faulty or naked wire, the current may flow via their body to the ground and they can get electrocuted or receive a severe electric shock. But if RCD is installed, it senses any loss of current thus (and not thus) it shuts all the electricity off, reducing the risk of serious harm or injury to any person or object.

Expert Tip: 

If your house or premises was built ten or more years ago, then it’s time to give some attention to your switchboard.

This brings us to the main question, Why do you need to upgrade your switchboard?

Below are some of the points that indicate reasons why your switchboard should be upgraded, let’s get started:

1. Unsafe circuits: If your home needs a lot of re-wiring time and again, you may end up using the wrong size fuse wire, thus making the overall circuit protection non-compliant with the size of the actual cable, which can lead to electrical fires. With the new Switchboard, you get wiring that complies with current ASNZS3000:2007 standards,.
2. Over-Crowded Connections:With the span of time, over-crowded connections may become loose, which may cause a wiring fault or can potentially lead to electrical fires.
3. Safe Option:RCD’s render more prominent protection against electric shock as compared to normal wires. Moreover, all circuits are labeled and identified properly so no guesswork is required. And, the best part? In the event of a fault, you can easily analyse which circuit has tripped without even touching the switchboard Thus, it becomes a safer option to be installed both at your home or office.
4. Saves on Future Costs:With the old switchboard, you will have to upgrade the circuit protection on each and every individual circuit that has been altered and/or installed in your new property. Thus, making the entire process more expensive than the regular switchboard upgrade. And, once the upgrade is done, it will allow additional room for future renovations.
5. No Risks:Old switchboard panels can potentially contain ASBESTOS. A new switchboard is fully upgraded and aesthetically pleasing. Removing the old one will remove any risk of this being disturbed in the future and will give you the confidence that your electrical switchboard is no longer the hazard it once was.

Conclusion

It is time to look into your faulty circuit breakers, fuse failures, and damaged wiring in order to get your switchboard upgraded.

If you’re searching for switchboard upgrades or repairs, DJ Spark Limited is here to help you with your switchboard upgrades and switchboard installations (you don’t need to repeat this underlined bit) Our expert technicians and electricians will help you in carrying out the inspection to diagnose the issue, resolve it and install a switchboard that meets all your requirements.

The post Why You May Need to Upgrade Your Switchboard? appeared first on DJ Spark.

However, when it comes to the most advanced stuff, you will need some more help. YouTube won’t help you implement complex electrical repairs, and you’d probably get intimidated when you see your building’s electrical components. For this reason, it is always recommended that you get in touch with qualified and licensed electricians.

Many experts even recommend hiring an electrician for the smallest of tasks. However, while we all understand that electricians are required, it’s also a chore to select one and work with them. Many people and companies around us provide electrical services, and choosing between the multitude of options available to you can be a daunting task, to say the least.

To help you out, we have some significant things to look out for as you make your decision.

Do your homework

When looking for any professional, you will need to do your research. The same applies to electricians. You generally begin by going on the internet and searching for electricians close to you. Also, you could ask friends and neighbors for references to see if they have worked with any electricians in the past and found them to be satisfactory.

Whatever it is, get as much information as possible about the electricians close to you and write it down.

Go through websites

Now that you have options, you need to dig a little deeper. Check their websites to get more information about them.

Primarily, it would help if you looked out for information such as whether they provide their services to your area, the testimonials from people they’ve worked with, and the types of electrical services they provide.

Look out for licensing details

As you check their website, keep in mind to go through their licensing information. Most municipalities and regions require that you only work with licensed and trained electricians, as these people have more skill and experience to handle jobs.

You should also consider insurance details. Hiring an insured electrician will protect you in case of an accident or if there is extensive damage to your property in the service process. You won’t be on the hook for any of these, and the company’s insurer will have to cover all related costs.

Generally, you can check insurance details by examining the electrician’s website and seeing if they have an Electrical Workers Registration Board (EWRB) license. All electricians will need to carry this around while they work, so you can easily ask for it. If a prospective electrician doesn’t have it, then you might want to reconsider the decision to hire the person.

The EWRB license is quite encompassing. It states whether an electrician is a trainee or a registered professional, so you can know who you’re working with and whether they’re registered. If an electrician is unable to provide the details, they’re most likely not registered.

Both licensing and insurance are significant requirements for any electrical service provider, and you should be sure to not compromise on those. If you find an electrician that provides the services you need but isn’t insured and licensed, skip them and move on to the next option.

Get references

You might have seen testimonials, but remember that these are just words displayed on a website. Anyone could have written those. If you’re looking to get peace of mind, find information on the electrician’s references and people they’ve worked with before.

An electrician worth the name will have no problem delivering names or references. Get in touch with these people and make your findings of them.

Ask for a service time frame

Your work shouldn’t have to wait for days. An electrician worth the name should be able to guarantee same-day service – or, at the very least, next-day service.

You should also ask for possible emergency service offerings if you have any electrical problems that will need to be addressed immediately. A 24/7 emergency electrical service is the gold standard.

The best electricians in Auckland will also be able to get the job done quickly and effectively. By doing this, they can be done with your project, and you can go back to your everyday life as soon as possible.

Service warranties and guarantees

Ask electricians for possible warranties and guarantees. These are a sign of top-quality workmanship and effective customer service.

Warranties are another component of a top electrician’s work. With a warranty, you know you’re covered if there’s something still wrong after the electrician completes the task. You won’t need to pay for a rework, and the electrician or their insurer will bear all associated costs.

Worker professionalism

The best electricians will go out of their way to provide top-quality service on your electrical system. Part of this is ensuring that their workers conduct themselves in a professional and upstanding manner.

Electricians should have the right equipment and training to handle the job. They should also have a sense of decency and respect for your home environment and your interior.

Some electricians even wear protective gear in your home, and they ensure to vacuum the area they work in before they leave. Essentially, it would look like they were never even there.

Cost estimations

The cost estimation is deliberately the last thing you should think about. This is because quality costs money, and you should never let money be the reason why you can’t hire the best electricians.

However, money is still a significant factor that you shouldn’t handle trivially. Nothing scares a homeowner like having to pay excess for service and waiting for long. You might want to do some research about the electrical service you need and the average cost. This way, you know when an electrician’s service is too high or not.

At the same time, try to examine the electrician’s cost estimate to see if it’s justified. Some electricians provide additional services on top of their primary one to satisfy you. Others offer price guarantees to keep your mind at ease. When you consider these extras and how useful they can be, you should be able to justify their cost.

All in all, try your best to arrive at a final number before the electrician even begins working.

The post How to Choose the Right Electrician For Your Home appeared first on DJ Spark.